Baksensor styreboks

Her skrives om alt det elektroniske og elektriske i din Audi.
Forumregler
"Din Audi" gruppen er primært til indlæg der ikke passer under de model-specifikke grupper.
Besvar
Brugeravatar
jakobh
Forumbruger
Forumbruger
Indlæg: 62
Tilmeldt: 29/05/2005 19:22

Baksensor styreboks

Indlæg af jakobh »

Hej
Jeg har monteret en 4F0919283B til min baksensor, men det er desværre ikke nok til grafisk visning!!

Er der en der kan hjælpe med det rigtige nummer, eller evt. har en boks til salg eller test.

Baksensoren virker med lyd.
Jeg har prøvet dette, men har nok ikke den rigtige styreboks.



The procedure is as follows:
1. Enjoying a block number, which is installed on the machine. It is located right in the A6 for paneling in the trunk, you can not shoot. (See photo).

Block Number: 4F0 910 283. Particular attention is directed to bukovku at the end! If you have C, E or H, then everything is OK (go to step 3), if A is - you need to change the block on N.

2. Buy a box (most modern H) and without any problems for 1 minute install a new one.

3. Making changes in the VAG:
1) Connect the VAG;
2) Select the section 76 (Park Assists);
3) Select the Coding;
4) Change the second number: 2 (0? Xxxxx);
5) Click do it!

4. That's it!
If everything is done and does not work, you must update the software on the MMI (from any dealer for 30 min.).

5. Enjoy!

Info on modules

It only works on certain modules

4F0 919 283 - won't work on all revisions
4F0 919 283 A - won't work on all revisions
4F0 919 283 B - can be enabled using VAGCOM
4F0 919 283 C - can be enabled using VAGCOM
4F0 919 283 D - can be enabled using VAGCOM
4F0 919 283 F - enabled from the factory
4F0 919 283 H - enabled from the factory

It's likely you have one of the first modules that did not support the graphic display.

Here is additional info on the modules:

4F0 910 283 - 4 sensors, no graphical support
4F0 910 283 A - 4 sensors, no graphical support
4F0 910 283 B - 4 sensors, graphical support
4F0 910 283 C - 8 sensors, graphical support
4F0 910 283 D - 4 sensors, graphical support
4F0 910 283 E - 8 sensors, graphical support, rear view camera support
4F0 910 283 F - 4 sensors, graphical support, rear view camera support
4F0 910 283 G - 8 sensors, graphical support, rear view camera support
4F0 910 283 H - 8 sensors, graphical support, rear view camera support

Those with back up sensors on C6 A6 cars, just got help on ability to add parktronic graphic via vagcom. Hope this helps others, as it is a nice easy feature to add.

Open Module [76] - Parking Aid

Short Coding:
0?xxxxx: Optical Illustration
0 = without Optical Illustration in Display
2 = with Optical Illustration in Display

Save changes, then enable Graphic display in MMI under the Parking menu. (Click yes when prompted for default work group coding from VCDS)
A6 C6 4F '05 2.4 Multi
A6 C5 4B ´98 2.4 Aut.
100 2.8 V6
100 2.2
Besvar

Tilbage til "Elektrisk udstyr"